Sharpening knives with HORL: how to do it
Sharpening knives with a HORL takes just a few minutes and requires no sharpening experience: a magnet holds your knife at the correct angle while you simply roll it back and forth. This is how you can make a dull knife sharp again, and a sharp knife makes cooking safer, faster and more enjoyable.
In this article you will learn how to tell if your knife is dull, how to sharpen it step by step with a HORL, whether to choose 15 or 20 degrees, which HORL (Cruise, Walnut, Oak or Pro) is right for you and which HORL sharpening stones you can use with it.
When is a knife dull?
Your knife needs sharpening if it struggles with soft foods. Three quick tests:
- A tomato or pepper: the knife slides over the skin instead of biting into it.
- A sheet of paper: the knife tears or snags instead of cutting cleanly.
- An onion: you have to press down instead of cutting, and the onion gets crushed.
It is useful to know the difference between honing and sharpening. Honing (with a rod or strop) straightens a slightly bent cutting edge and maintains a sharp knife. Sharpening removes a thin layer of steel and gives the knife a new cutting edge. If your knife is truly dull, honing will no longer help and you will need to sharpen it. You do this with the diamond disc on your HORL.
Which sharpening angle should you choose on your HORL: 15 or 20 degrees?
The sharpening angle determines how sharp and robust the cutting edge will be. A smaller angle creates a sharper, finer edge. A larger angle creates a sturdier edge that is less likely to be damaged.
| Angle | Characteristic | Suitable for |
|---|---|---|
| 15° | Delicate sharpness | Many Japanese knives and Damascus knives |
| 20° | Solid, durable sharpness | Many European kitchen knives |
Not sure? Then look at where your knife comes from. A Japanese knife is usually thinner and harder and suits 15°. A classic German or French chef's knife usually suits 20°. The HORL 3 Pro also offers 10°, 13°, 22° and 25°, for example for specialty knives and outdoor knives.
Sharpening knives with a HORL in four steps
With a roll sharpener like the HORL, sharpening is mainly about rolling. The magnet holds your knife at the correct angle, so you do not have to estimate it yourself.
- Choose your angle. Set the sharpener to 15° for many Japanese knives or 20° for many Western knives and place your knife against the magnet.
- Sharpen with the diamond disc. Roll it gently back and forth. The diamond disc removes material and makes your knife sharp.
- Polish with the ceramic disc. Turn the sharpener around and polish with the ceramic disc for a clean, smooth finish.
- Test the result. Try a tomato or a sheet of paper. If it cuts cleanly, you are done.
Work slowly and with light pressure. Pace and pressure matter more than strength. Always sharpen both sides of the knife so that the cutting edge remains symmetrical.
Which HORL is right for you?
All models work in the same way with a magnet for the angle. The difference lies in the materials, discs and adjustment options. View all models on the HORL page.
HORL 3 Cruise. For those who want to start affordably and sustainably. Made from recycled ocean plastic, with angles of 15° and 20° and a diamond and stainless steel disc. Please note: the discs are fixed and cannot be changed.
HORL 3 Walnut. A warm, timeless design in dark wood. Solid walnut with its own grain, a diamond and ceramic disc and Quick Lock for changing discs in one motion. Only 15° and 20°.
HORL 3 Oak. The same technology as the Walnut, but in light oak. Walnut and oak work exactly the same, so choose the wood that best suits your kitchen.
HORL 3 Pro. For those who want to get the most out of their knives. Six angles from 10° to 25° and a 1:3 planetary drive, allowing you to sharpen three times faster. This is the most expensive in the series.
Not sure? The HORL 3 in walnut or oak is the most popular choice: you get interchangeable discs and a beautiful design, and you can buy finer stones later.
HORL sharpening stones: always work from coarse to fine
The finer the stone, the smoother the cutting edge. The rule is simple: start coarse to make the knife sharp again and finish fine for the final touch.
- Diamond whetstone (coarse): for quickly restoring dull knives.
- Fine whetstone: for an even finer finish.
- Extra fine whetstone: for an extra smooth edge.
- Extra fine Kagami: the finishing touch for a mirror-smooth edge.
Want everything at once? Then the HORL 3 Premium sharpening set is a complete option, with a fine and an extra fine disc and a leather strop. Please note: HORL 2 discs do not fit the HORL 3. Always check the 'Suitable for' section in the product description when ordering. The individual discs are intended for the HORL 3 and the HORL 3 Pro, because the HORL 3 Cruise has fixed discs.
New from HORL: the bread knife
HORL has just launched its own bread knife: the HORL Bread Knife. It has the Triple Pro Cut serrated edge, is sharpened on both sides so that left- and right-handed users can cut straight, and has a solid wood handle. You can choose it in walnut or oak, just like the HORL 3.
The great thing is that you sharpen this bread knife yourself with your HORL. According to HORL, this works with almost all HORL sharpeners, except the HORL 2 Cruise, because it does not have a 15° angle. You sharpen at 15° with the honing disc and that takes about 1 to 2 minutes per month with normal household use.
Clean the bread knife by hand and dry it immediately. It is not dishwasher-safe.
Maintenance of your HORL and frequently asked questions
Clean the sharpener after each use with a dry or slightly damp cloth. Do not immerse it in water and do not use aggressive cleaning products. You can easily remove sharpening residue from the diamond and ceramic discs with an eraser. If the diamond disc is really dirty, unscrew it and clean it with warm water, a little washing-up liquid and a brush. The discs on the HORL 3 Cruise are fixed, so you cannot unscrew them.
How often should I sharpen my knives?
That depends on how often you cook. Test regularly with a tomato or paper. If you notice that the knife starts to slide, it is time. Sharpening often and briefly keeps a knife sharp with less material loss than rarely and for a long time.
Can I sharpen any knife with a HORL?
A HORL works well for most kitchen knives with a straight cutting edge. Choose the angle that suits your knife: 15° or 20°, or one of the other angles on the Pro.
What is the difference between sharpening and honing?
Honing straightens the cutting edge again. Sharpening removes steel and creates a new cutting edge. A dull knife needs to be sharpened.
Which HORL should I choose?
If you want to start affordably and sustainably, choose the Cruise. If you want interchangeable discs and a warm design, choose the Walnut or Oak. If you want the most adjustment options and speed, choose the Pro. View them all on the HORL page.




